06-17-2019 12:21 PM
I tried everything and I am not able to receive any input from tracker when the controllers are on. If I turn them off, I receive the input. I dont need to get the inputs from Left and Right controller, I only need to track them. What can I do to make this possible?
06-17-2019 03:44 PM
Technical Specialist - San Francisco, CA; Monday-Friday
06-17-2019 07:49 PM
@arjun What type of input you want from tracker?
Are you using any accessories for tracker?
06-18-2019 09:27 PM
I've also reach the same situration.
i am using the hyper blaster with the tracker (2018), i cannot get the trigger/pag/menu/grip input from the tracker once the controllers are connected.
06-18-2019 10:51 PM - edited 06-18-2019 10:53 PM
@mgyeung Didn't you mention that you can get at least one tracker input?
I am still verifying the multiple trackers case.
06-19-2019 12:15 AM
For unity 2019.1, i can get input from 2 controllers and 2 trackers poco input at most, usually 2 controllers and 1 tracker poco input only.
For unity 2018.3, i only can get 2 devices input.
e.g. 2 x controllers OR 1 controller and 1 tracker poco OR 2 trackers poco
If i turn on the controller, the controller will take over the trackers input immediately, which means i can only use either 2 of controller or trackers input.
p.s. if i turn on 2 controllers, trackers are not able to get input but still can track the position.
06-19-2019 02:01 AM
@mgyeung I was using Unity 2018.3.5f1, I can get 2 controllers with 1 tracker input.
You can try modify the role of tracker and play your app again.
Not sure why sometimes tracker will not be able to get input, after I switched role, it works again.
06-19-2019 02:11 AM - edited 06-19-2019 02:12 AM
@chengnay Thank you for your reply.
Is it only support 1 trackers input? Could you please help to try get input from 4 trackers or more at the same time?
06-19-2019 02:13 AM - edited 06-19-2019 02:14 AM
@mgyeung I still working on multiple tracker input debugging. Sorry for the delay.
06-19-2019 02:29 AM
@mgyeung I got the same result for Unity 2019.1.7f1 and 2018.3.5f1.
Two controllers and one tracker input.
Even I turn off 2 controllers, I can only get 1 tracker input.
I couldn't get 2 trackers input.
06-19-2019 03:07 AM
@mgyeung I am rolling back SteamVR version to double check. I will need more time to debug this part.
06-20-2019 12:45 AM
I found something strange.
In SteamVR Input Debugger I was able to see the tracker input being pressed.
But, in Unity app, I couldn't see anything. At most I can see is 1 tracker input.
I just sent Steam message to see if they can help resolving this issue.