05-22-2018 04:39 PM - edited 05-22-2018 04:39 PM
I'd definitely look at the Kinect as the source of interference. It's by far the easiest thing to isolate. Vive tracking is based off ~850nm IR and the Kinect works off ~830nm - we've seen some reports that the new ASICs/algorithms can be incompatible with Microsoft depth technologies.
First, verify the issue is still present with IR interference sources removed. Next, change USB ports to see if it alters the behavior. Avoid plugging into a USB port. Past that, we'll have to look into more advanced troubleshooting.
Technical Specialist - San Francisco, CA; Monday-Friday
05-22-2018 04:47 PM
Thanks David, I shall. I'll set it up as a purely virtual camera tomorrow and see if we get similar issues.
I am not averse to swapping over to a controller if they're less point-cloud sensitive. That's what superglue is for.
05-23-2018 08:11 AM
What is the expected performance of the Trackers in terms of accuracy and precision and how should they compare to the Controllers?
Based on my experience I'd estimate:
Controller: ~2-3mm accuracy + 1mm precision
Trackers: ~20-30mm accuracy + ~10mm precision
05-29-2018 01:06 PM - edited 05-29-2018 01:32 PM
Did you fixed the issue? I have exactly the same problem.
- Geforce 1080 GTX
- VIVE PRO HMD
- Steam 1.0 Tracking
- 2 controllers (the old ones)
- 3 VIVE (2018/03) trackers
We tried a lot of different scenarios (USB hubs and direct connection, with different room setups, ...) with no success. We took a lot of effort in hiding all reflection surfaces but with no success. The 3 VIVE trackers just have a lot of jitter and they drift also away.
Has anyone recommendations?
06-01-2018 04:05 AM
06-01-2018 07:41 AM - edited 06-01-2018 07:44 AM
Those having issues with their tracker can you please share the P/N of your tracker?
I believe different regions have different part numbers. From what I gather (I might be wrong, its just what I've found on online shops - please correct me if I'm wrong)
99HALM003-00 is the older gen US(?) version
99HALM008-00 is the older gen euro version
99HANL003-00 is the euro 2018 version
99HANL005-00 is the japanese 2018 version
99HANL002-00 is the US 2018 version
I'm not sure what the differences between them are (if any) but I figured it might be a starting point for isolating the problem.
Mine is the 99HALM008-00 version and I've been having issues too.